New for 2026! Tour-10 V2 RGB controller

The Tour-10 V2 controller is the premier impact reacting LED system for drums.

By utilizing standard drum triggers LED’s can be triggered to flash different colors and also do slow fades or quick flashes based on the settings programmed for each output.

The controller can be used as a stand alone system with limited functionality or with a DMX lighting app to take full advantage of the system.

The system uses 80 channels of DMX:

• The first 30 channels are RGB color settings for when the drum is hit
• The next 10 channels (31-40) are switches to turn on and off the triggers
• The next 10 channels (41-50) are to enable or disable the fade function for each channel
• The last 30 channels are RGB color settings for a constant or background color (always lit until drum is hit)

Completely redesigned for 2026 the Tour-10 V2 controller is the go-to for touring musicians.

• New fully aluminum case design with sleek black powder coat
• 200 MHZ processor with 12 bit A-D converters for lightning fast response
• Full 360 watts of power to drive even the largest drum sets
• DMX RDM control now available to change settings from lighting software
• Opto-isolated DMX ports with isolated power supply and surge protection
• Capacitive touch screen with 800 x 480 resolution for crisp screens with fast touch response
• Variable speed cooling fan to cut down on noise and increase cooling when needed
• New DMX channel layout to allow triggers and fade to be turned on and off from DMX
• USB port for back and restore of configuration and also firmware updates
• Expansion port on output board to allow for future upgrade options

All connectors are high quality Neutrik connectors for road worthy durability.