High Output RGB LED strip for Tour-10/Tour-Mini/Tiny One


These are bare LED full color RGB strips with a double stick adhesive on the back and a 4 pin locking connector which mates to the Tour-10, Tour-Mini and Tiny One controllers
It’s a single strip for one side of the drum. Two strips would be needed for each drum to light the top and bottom of the shell.
These are meant to be installed directly to the inside of a clear or translucent drum for full effect or to the outside of the drum either directly on the shell or on the hoop.
If you use two strips per drum you can purchase a “Y” connector to connect them to one power cable back to the controller or we can custom make a matched pair for each drum with one connector.
Connector shells can be supplied either installed or loose so you can route the power wires through the vent and then install the connector shell

SKU: RGB-LED-Strip Category:

Additional information

Weight 0.5 lbs
Dimensions 8 × 8 × 1 in
Drum Size

6", 8", 10", 12", 13", 14", 16", 18", 20", 22", 24", 26"